Welcome to Coldsmoking

cookery school

Plans

Plans

The cold smoker in these images can be made really simply from basic materials and a few wood working tools. You don't have to be an expert joiner to complete this project.

All the materials can be sought from your local hardware store or local builder's merchants.

You can see from the images that this cold smoker won't look out of place in your garden and just think of all the delicious cold smoked food you'll get from it.

 

Making your Own

Making your own cold smoker couldn't be easier. My drawings are a comprehensive, easy to follow set of instructions for making your own Coldsmoker from scratch. with easy to follow drawing notes and detailed drawings for every stage of construction. We even have a plans support page for answering your questions. Purchase your plans now! only 1.99 Take a look at the pictures to see what you could make.

 

Buy Plans

The Coldsmoker plans can be downloaded in either PDF or Word format. Take a look at some of the sample page images below.

The cold smoker plans provide a comprehensive, illustrated set of instructions with precisely drawn engineering quality drawings.

All for just 1.99!

When you've logged onto paypal and about to complete your payment it's necessary afterwards to return to the this site to complete your download. Paypal will ask you to "Return to Coldsmoking ". You will be able to return to coldsmoking.co.uk to complete your plans download. if you get into difficulty and can't download your plans after making your payment, drop me a line via the contact page. I'll send you the plans via email.

 

Plans Support

If you need a little help and support take a look at this page to see if there's an answer to your question. After all, making the smoker and coldsmoking your own smoked salmon is a goal worth pursuing.

Q & A - Here are a dew of the most popular questions and answers

Q, On the side panel the battens are sealed tight to the unit at the bottom. But on the back panel the lowest batten has a gap shown. Is this intentional?

A, No, the bottom piece of feather edge should be secured flat to the frame. When assembling the featheredge boards should line up evenly on the sides, back and front when the coldsmoker is assembled. You can guage this when assembling the side and back frames. It may be helpful to lay the back of the smoker and the two side pieces on a flat surface and place the first piece of cladding at the bottom working up with a 15mm overlap.

Q, On the back of the cold smoker I noticed the featheredge board is longer than the width of the smoker. Why is this and what is the measurement of the overlap on each side. What is the measurement of the overlap for the fetheredge board?

A, There is an overlap on the back featheredge boards to hide the frame on the side panels so one just sees the fratheredge. The measurement of the overlap should be the same as the width of the batten (18mm) although experience has shown me that making it a little larger (I made mine 23mm each side) is ok and if it doesn't look right when assembled loosely it can be planed back to suit.

Q, When it states the side panels are clad in feather edge (shiplap) sawn treated softwood with an overlap of 15mm... what does this mean? Is it an internal sealing for the battens?

A, The overlaping of the boards provides a rudememtary seal (15mm of overlap). As with timber as it seasons with time it does move a little so to prevent smoke loss I used a flexible decorators caulk to seal this gap. feather edge is a term given to this kind of cladding which is typically found on fences and garden sheds. The width of the board varies in thickness from 12mm along one edge to around 5mm along the opposite edge.

Q, If viewing the featheredge boards from one end they look like they are a right angled triangle. Is it important which side is fixed against the frame of the coldsmoker?

A, not really, although I check each board before fixing them to the frame to make sure they all go on the same way. Personnaly, the best finish is achieved when all the boards are fixed with the hypotenuse facing out.

Q, Where can I buy the timber for this project?

A, Wickes stock all the parts listed in the plans.

    THE PERFECT GIFT

    A great gift voucher for the foodie in your life who needs to do something different. Redeemable against our Food courses in Great Linford Milton Keynes throughout the year.

    JOIN OUR NEWSLETTER FOR INFORMATION & OFFERS